How To Break A Lock Without Bolt Cutters. All you need to do is use two bobby pins to finish the task properly. You can cut them with an angle grinder as others have said.
With your dominant hand, grip the ballpoint pen and twist it inside the lock while pushing firmly. Choose a suitable pair of bolt cutters. Use a pair of bolt cutters to cut the lock within a short period.
Table of Contents
Pair Of Gloves And Safety Goggles.
Hold tightly on the grips of the cutters and squeeze the handles until you successfully cut the shackle. Tilt the lock to the side so you can easily cut the side of the shackle, or the metal clasp that holds the lock together. Lightly sand down the lock with your sandpaper.
You Can Cut Them With An Angle Grinder As Others Have Said.
Place The Blades In The Shackle Of The Lock And Position The Bolt Cutter Near Your Waist.
A wheel grinder can also cut through a steel lock pretty quickly, although. You can use wrist instead of the whole arm to obtain energy essential to press and twist. A bobby pin is all that is needed to open a bike lock.
Push And Twist The Pen Inside The Keyhole.
Put the straight end of the hairpin into the keyhole of the lock and apply pressure to bend it by using it as a hook. How to cut a padlock without bolt cutters (9 quick & easy methods) 1. Use your wrist rather than your whole arm to get the energy needed to push and twist.
These Will Not Move As Freely As The Other Wheels.
All you need to do is use two bobby pins to finish the task properly. Feel for any of the wheels that are starting to bind. Look for appropriate bolt cutters that could cut the lock.