How To Break Into A Sentry Safe With Keypad. The pull force of this magnet must be higher than 57 kg. Turn the dial three turns to the ‘right’, stopping at the first number in the combination.
To start, position the handle of the safe upward in the horizontal position. Once you hear a ‘click’ sound, continue jiggling the nail file inside the lock to ensure that you’ve gotten the last ‘click’ noise out of the safe. Now, put the second clip into the bolt gap.
Either Using A Digital Safe Or A Sentry Safe, You Can Use Neodymium Rare Earth Magnet To Open The Lock Instantly.
Have completed this many times.thanks bob ask your own consumer electronics question The handle has come all the way out and when i put it back in and try to turn it to open, it won’t click to open the safe. Lock the sentry safe 9.
Hammer Didn't Work, So We Switched To The Axe.
Now, jiggle the paperclip inside the lock. Turn the dial ‘right’, stopping at the last number in the combination. Hold the magnet at the top left corner with one hand and the safe’s handle with the other.
This Will Allow You To Open Up The Sentry Safe Without Keys.
What a hunk of junk! Turn the dial to 0. Make sure that it has a high and general pull force.
Pitch That Top Portion Closed So That The Top Part Is About 0.25 Inches In Length.
Check the instruction manual to see how to access the battery compartment for your specific model safe. Close the top half 7. So i have a ds3607 sentry safe with keypad and handle.
Grasp The Handle And Wiggle The Magnet Until The Safe Opens.
Turn the dial two times to the ‘left’, topping on the second number in the combination. To start the procedure, you need to get a rare earth magnet. If it's an older model, you can often pick the lock using a paperclip or a small screwdriver.