How To Change A Tire On A Split Rim

Insert The Valve Stem If There Isn't One Present.

The rims that split in down middle of the assembly. If you’re changing a rear tire, place these in front of the front tires. Clean and inspect the rim.

Lubricate The Valve Stem With A Bit Of Tire Lubricant, Then Press It Into The Hole On The Inner Portion Of The Rim Where The Tire Will Later Cover.

It's becoming more and more difficult to get reputable big truck tire shops to touch the true split rims, i.e. Next our techs press the tires. Slide the pointed end between the rim and the tire.

There Are Many Hazards Associated With Tyre And Wheel Assemblies, And Split Rims Pose Substantial Additional Risks.

Once they're both on, pull them towards the edge of the tire to pop the bead out. The easiest way to go about this would be to identify the exact front and rear axles you have on the truck and then cross reference that axle (s) to the ones having disc wheels in that period (for example you may find the correct hubs on a f 600 dump truck). If your flat tire is at the.

Unscrew The Cap From The Stem To Expose The Valve Beneath It.

Lay the tire flat on the ground and look for a small stem on the inside of the rim. These two sets can be on the same Tighten the press to push the bearings into.

Locate The Valve Stem On The Tire And Remove The Cap.

Method 2mounting tires by hand. Lay the rim on the floor and align the valve stem with the slot in. Tighten it so that the tired presses down and the bead starts to bend off.