How To Change Honda Key Battery 2014. Next, use the flathead screwdriver to gently pry apart the two halves of the key fob. From there you can go out.
Wedge the key and lightly twist; Once the locks have cycled, your vehicle is in. Now you have to pry the top and bottom halves apart.
Honda Civic Key Fob Battery Replacement Guide.
Once the locks have cycled, your vehicle is in. How to change the battery in the key fob remote control for the keyless entry system of a ninth generation honda civic with the replacement part number and photo illustrated steps. Being careful not to touch the battery terminals, remove it carefully.
For Vehicles With Fobs, Keep At Least One Sealed, Unopened 2032 In Your Car For Quick Replacement In An Emergency.
Using your other hand, carefully pry the dead battery out and replace it with the new one. Then orientate the two halves as shown above and snap them back together. The back of the key fob should pop off.
Locate The Button To Release The Metal Key Inside The Fob.
Separate the two halves of your remote using a small flathead screwdriver. Turn the key to the “on” position and hold the “lock” button on the key fob for one second. To change the battery you will need a mini phillips head screwdriver.
Replace The Old Battery With A New Cr1616 3 Volt Cell By Pushing It In With The + Side Facing Down Into The Rear Cover Of The Remote Control Unit.
I bought an energizer cr1620, and it was too thick. If your keyless entry remote has a screw, remove it using a jeweler’s screwdriver. Repeat this process twice more.
Now That You Know How To Change The Battery In Your Honda Key Fob.
2013, 2014, 2015 & possibly also the 2016) honda civic in changing the battery in the key fob remote control for. Wedge the key and lightly twist; Follow these steps for an easy way to open the honda key fob: