How To Drill Out A Locking Wheel Nut. Your wheel bolt is now off. You have to remove the caps.
On other cars i've had i've had to drill them out. You can also use any screwdriver to take out the lug nut caps. It is easy to store ;
There Is One Method, Method 5, Which You Should Never Attempt, Leave This One To.
Peugeot citroen type locking wheel nuts with. If you're in an emergency we can normally get a locking wheel nut remover with you that same day in the south of england including in and around london. The mechanic used a sort of vibrating digger to try and get it.
If You Do Need To Drill Out A Wheel Bolt, The Easiest Way Is By Using A Mag Bas.
Taking into account the time and tooling involved. Locking wheel nut removal (king's lynn) (page takes a long while to load due to high definition pictures). Only answer is to drill it out.
Then Swiftly, Put The Threaded Part Of The Socket On The Lock Bolt And Hammer It About A Dozen Times With The 5 Pound Hammer.
Method 1, method 4, method 2 (if you couldn't find a removal tool), and finally method 3. Starting with small drill bit sizes and working my way up in diameter. You will need some strength to release it.
Concentrate Your Efforts On Removing The Hub From The Vehicle And Take It To A Garage With Access To A Press.
Got to about 9mm and the drilling couldn't get any further. You want precision, and you aim for the center of the socket. Then, increase the pressure until it begins to loosen.
You Don’t Want To Hit Your Alloy Wheel, Brake Disc, Hub Assembly, Etc, So Make Sure You Start Your Hole Dead Center Of The Wheel Stud Or Lock Lug Nut.
That’s where we can help. Your wheel bolt is now off. Mount the lug wrench on the end of the wheel bolt.