How To Make A Squirrel Trap With A Plastic Bottle. The head of each screw should be inside the pipe with the threaded part outside of the pipe. Now go ahead and play with all the adjustments on the trap.
This way the squirrel will go down after the food, but cannot. The baffle can be adjusted by sliding it up or down on the pipe. For the base do not drill 6” from either end, put 6 in the middle.
Touch Device Users, Explore By Touch Or With.
Here is a simple pvc squirrel trap that is humane and is a capture and release type of trap. Using your pen, make a mark where the tape measure ends; You don’t want the tube to be fully vertical, as the squirrel won’t go down the tube.
Start By Cutting The Bottle In Half Lengthwise.
Make sure the door is always up when using the fake squirrel weight. Make your own catch alive trap. Good luck and happy trapping.
Pvc Humane Capture Release Squirrel Trap:
Turn this already cut part of the bottle over and put it upside down inside the other part, so that it acts as a funnel. Attach the funnel to the body. Hold the end of the tape up to the end of the bottle’s lid.
On The End Of The Top Pipe With The Two Holes, Reach Inside The Pipe And Push One Machine Screw Through Each Of The Holes.
I have many more interesting humane traps i have invented. How to make a squirrel trap with a plastic bottle; The gap between the top of the stove pipe and the bottom of the lid is just the right size for a squirrel using its arm to reach in from outside of the feeder hood.
On The Outside Of The Pipe, Place A Washer On Each Of The Screws, Screw Two Nuts On.
Here are the search results of the thread how to make a squirrel trap with a cardboard box from bing. Then use this bottle to sit on top of the trap at different spots to simulate the weight of the squirrel in the trap. The head of each screw should be inside the pipe with the threaded part outside of the pipe.