close
close
How To Measure Cabinets For Granite Countertops

How To Measure Cabinets For Granite Countertops

How To Measure Cabinets For Granite Countertops

How To Measure Cabinets For Granite Countertops. For example, say your countertop measures 200 x 26 inches including the overhang. 7.repeat this process for every section of your countertop.

How To Measure Cabinets For Granite CountertopsHow To Measure Cabinets For Granite Countertops
How To Measure For Granite Countertops The Guide Ways from theguideways.blogspot.com

Using the measuring tape take the wall to wall length of the countertop in inches. 7.repeat this process for every section of your countertop. Be sure to double check the measurements when you’re done to ensure accuracy.

Standard Width Of A Base Cabinet Is 24”.

Your backsplash is 26 x 4 inches, and the island is 60 x. For example, say the length of the countertop is 108” and the depth of the standard countertop (on a 24” deep cabinet) is 25 ½”; Make sure you gather the following items before beginning the measurement of your countertops.

Now You Need To Measure Around The Perimeter.

8.make sure to measure bar tops. 7.repeat this process for every section of your countertop. There are standard measurements or sizes used across the cabinet and countertop industry.

When Measuring Just Base Cabinets Without A Top, Add 1.5” To The Width To Accommodate For Overhang.

Make sure you measure in inches, and multiply the length by 25.5 inches since typical cabinets are. 62.5” x 25” = 1562.5”. 108” x 25.5” = 2,754 (divide this number by 144) 2,754/144 = 19.12 sq ft.

See also  How To Avoid Paying Spousal Support In California

Whether You’re Installing New Granite Counters Yourself Or Just Looking For An Estimate, Measuring Your Counters Is An Important Step.

If it’s on the right, place shims underneath the two front sides of the cabinets. * now divide by 144 to obtain square footage. 72 in x 22.5 in = 1620 sq in.

Using The Measuring Tape Take The Wall To Wall Length Of The Countertop In Inches.

34 inches and 43 inches on the tape get inverted all the time, even by the best craftspeople. Notice the red piece measurement is the entire length of the countertop, all the way to the wall. Now, start measuring the depth starting from the wall to the front.

Leave a Reply

Your email address will not be published.