How To Mount Blink Camera Mini. You can either put the device serial number or scan the qr code from the device. The kit includes a wall mount, screws, and anchors.
The vertical/wall mount opening (1) is located above the usb port at the rear of the camera. Place the camera under a covering or awning to prevent it from suffering elemental exposure or water damage. According to the blink website you are supposed to be able to use it with or without the right angle adapter.
The Feature Must Be Used Once The Camera Is Placed And Installed At Your Preferred Location.
Once done, it will prompt you with a tap sound. This article will show you how to mount your new. Qr scan would need the device access on the mobile device.
Once You Find The Optimal Location For Your Camera, Screw The Mount Into Place.
How to mount a blink mini camera step by step guide step 1: However, don’t cover the device up to the point where visibility ends up compromised. The camera has two mounting points.
Before Using Your New Mini Camera, Make Certain To Remove The Clear Protective Film Covering The Lens.
Now, carefully reattach the mounting bracket and back cover of the camera by gently pressing the same. After mounting the camera to the wall or ceiling, you can rotate the. The blink mini camera comes with a very handy mount that can attach the camera to several different surfaces.
Hold The Mount With Both Hands The Apply Pressure On The Outer Ring.
Mounting your blink xt2 camera. Mounting your blink xt2 camera · camera mount, mount riser, and two screws · put the mount and the riser together · screw holes line up on these two accessories. At any rate, do the following:
Mounting Your Blink Mini Camera.
Place the camera under a covering or awning to prevent it from suffering elemental exposure or water damage. Blink camera has a built that can be easily made to mount on a curtain rod of your choice to cover your room. Remove mount from the camera.