How To Replace Honda Pilot Key Battery. Perform these steps within 5 seconds. The old battery in this fob was a renata cr1616 lithium 3 volt cell.
Insert the battery back into the motherboard with the positive sign facing out. Start with the key out of the ignition, drivers door is open all others closed and drivers door is unlocked. Follow these steps on how to open a honda key fob safely and replace the battery with ease:
Provided A Replacement Key/Remote Under Warranty.
Slide that button open, and pull the key out. Once the locks cycle, the key fob has been successfully paired with your vehicle. Hold the “lock” button for one second.
Insert The Key Into The Ignition(Do Not Turn) Pull Key Out.
#10 · feb 19, 2007. Wedge the key and lightly twist; The doors will then lock and unlock automatically.
Use The Metal Key To Gently Pry Apart Your Key Fob.
Push and slide the button by the honda logo to release your metal key. Cr2032 coin battery 🪙 you need: Once the locks have cycled, your vehicle is in.
Twist The Key To The “Off” Position After Releasing The Button.
Switch the ignition to the on position, then press and hold the “lock” button for one second. From there you can go out. Start with the key out of the ignition, drivers door is open all others closed and drivers door is unlocked.
Locate The Button To Release The Metal Key Inside The Fob.
Enter the car and close the doors. Perform these steps within 5 seconds. Press down the lock button on the key fob after turning the key to the “on” position.